Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community

The Internet's Largest and Fastest Growing Engraving Community
Discuss hand engraving using basic to the most advanced methods and equipment
Forum Members: 14,763. Welcome to our newest member, mtan1446
EngravingForum.com - Domain since Feb 7, 2003

Graver Video Conferencing is empty Join now!


Go Back   Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community > Forums > Tutorials and Contests - Hand Engraving Forum
ENGRAVING TOOLS - Paypal accepted Classes Glossary Feedback Tips Sharpening Bulino Videos Forum Policies

Reply
 
Thread Tools
  #1  
Old 03-25-2009, 06:06 PM
Daniel Houwer's Avatar
Daniel Houwer Daniel Houwer is offline
Platinum
 
Join Date: Mar 2008
Location: Haarlem, Holland
Posts: 2,125
Send a message via Skype™ to Daniel Houwer
Default Lasercopy transfer

This has been told before at least a dozen times.
I just put some pictures to it.

What you need,
Laser copy or laser print. The toner is the magic in this!
Acetone (this was done with nailpolish remover) , brush, scissors, tape and metal sheet.












To use this method, be clean and quick. Do some tests before ! From moistening with nailpolishremover or acetone until revealing the transfer it only takes less then a minute. Work clean and fast.
For smaller transfers a cotton swab or cloth would work very good.
Do test the copier, I had a copier next door that worked a charm. It got replaced and did not work at all. Another copier worked better with denaturalized alcohol and wintergreenoil. Do do some testing!
As I said, its all been said before! So I only hope my picture's help a bit.

Daniel
__________________
The best things in life are still made by hand.
Daniël's Photo Album
Reply With Quote
  #2  
Old 03-25-2009, 06:38 PM
airamp airamp is offline
Platinum
 
Join Date: Mar 2008
Location: Scottsdale, Az.
Posts: 684
Default Re: Lasercopy transfer

Hi Daniel,

Thanks for the great pictures and your quick tutor of this type of transfer.

I did hear of it but never saw the results.

Nice job.

AirAmp
Reply With Quote
  #3  
Old 06-07-2009, 04:07 PM
dvc325 dvc325 is offline
Copper
 
Join Date: May 2009
Posts: 3
Default Re: Lasercopy transfer

Great job, Thanks for taking the time for us newbies.
Reply With Quote
  #4  
Old 06-08-2009, 09:21 AM
TheEngravedLine's Avatar
TheEngravedLine TheEngravedLine is offline
Steel
 
Join Date: Jan 2008
Location: Maryland
Posts: 49
Default Re: Lasercopy transfer

I scanned in a drawing and attempted this method with an HP 2710 LaserJet but couldn't get this method to work with my printer. Since I didn't have any acetate handy, I printed on Denril vellum. When it was almost dry, I burnished it on to the metal with a Q-tip. I wish my printer would have cooperated with the method above though, since those transfers are much nicer in contrast and clarity. -Mel
Attached Images
File Type: jpg TransferExperiment1.jpg (92.5 KB, 229 views)
File Type: jpg TransferExperiment4.jpg (78.8 KB, 224 views)
Reply With Quote
  #5  
Old 08-05-2009, 03:43 PM
Daniel Houwer's Avatar
Daniel Houwer Daniel Houwer is offline
Platinum
 
Join Date: Mar 2008
Location: Haarlem, Holland
Posts: 2,125
Send a message via Skype™ to Daniel Houwer
Default Re: Lasercopy transfer

Hi Mel and all others.
Did the toner stick just a bit or not at all?
A laser printer that I used recently did not want to transfer by pulling the paper of.
Then I remembered a golden tip from someone else who said he left the paper on until the acetone dried up completely. After that he wetted the paper under the tap and when it was wet he started to rubb of the paper.
It comes off in little rolled up bits but if done with care you can rubb of the paper almost completely. This might not work (with the high quality paper i used) for very fine work but I did use it on both buckle designs.
http://www.handengravingforum.com/showthread.php?t=4058
There were a few furry bits under the microscope but still very good to see where the graver should go.
If I try again I will make some pics.
__________________
The best things in life are still made by hand.
Daniël's Photo Album
Reply With Quote
  #6  
Old 08-05-2009, 03:48 PM
rip kennedy rip kennedy is offline
Copper
 
Join Date: Jul 2009
Posts: 1
Default Re: Lasercopy transfer

Reply With Quote
  #7  
Old 08-05-2009, 04:37 PM
SVD's Avatar
SVD SVD is offline
Platinum
 
Join Date: Mar 2008
Location: Kansas City, MO
Posts: 2,555
Default Re: Lasercopy transfer

I've found that there's a window of time to remove the paper. Too wet and the image smears. Too dry and it re-adheres to the paper.

Letting it dry and then soaking off the paper sounds interesting.

I learned a similar trick many, many years ago I used to use to make little signs & plaques (now I can just engrave them).

Print your design with a laser printer, cover it with clear tape or clear contact paper (depending on the size). Soak this in slightly soapy water until the paper is thoroughly saturated. Gently rub the paper off of the tape and it will leave the image behind. Usually the tape still has enough adhesion you can then lay it down onto a subtrate to make a sign. This also works with the print in a glossy magazine - you can turn the pictures into what look like slides.

Hmmm... wonder if adding a couple of drops of dishwashing soap would help take the paper off of a transfer for engraving?
__________________
Enjoy!

Steve :->
(KCSteve in most forums)
SVD's Photo Album
Reply With Quote
  #8  
Old 08-05-2009, 05:23 PM
Daniel Houwer's Avatar
Daniel Houwer Daniel Houwer is offline
Platinum
 
Join Date: Mar 2008
Location: Haarlem, Holland
Posts: 2,125
Send a message via Skype™ to Daniel Houwer
Default Re: Lasercopy transfer

Hi Steve,
Have to try that too


Now, why wast good telivision time whenn you can make some pics too

The laser copy, silver plate etc.

Transfer taped onto the plate,

Transfer wetted with nailpolish remover (acetone)

How it looks whenn dry

Soaked and half rubbed away. Dont rubb to hard and wet often.



You can rubb fairly roughly but whenn the rolls of paper get bigger you should rinse. You can damage the transfer by rubbing too much. But if you don't rubb enough the left over paper fibers will be anoying at least Do remind that this is a tip from someone else. I just put photo's to it.
Good luck and hope this helps.

Daniel
__________________
The best things in life are still made by hand.
Daniël's Photo Album

Last edited by Daniel Houwer; 08-05-2009 at 05:25 PM. Reason: Forgot a dot
Reply With Quote
  #9  
Old 05-27-2010, 10:58 AM
aikisan aikisan is offline
Copper
 
Join Date: May 2010
Location: germany
Posts: 1
Default Re: Lasercopy transfer

Quote:
Originally Posted by Daniel Houwer View Post
This has been told before at least a dozen times.
I just put some pictures to it.

What you need,
Laser copy or laser print. The toner is the magic in this!
Acetone (this was done with nailpolish remover) , brush, scissors, tape and metal sheet.












To use this method, be clean and quick. Do some tests before ! From moistening with nailpolishremover or acetone until revealing the transfer it only takes less then a minute. Work clean and fast.
For smaller transfers a cotton swab or cloth would work very good.
Do test the copier, I had a copier next door that worked a charm. It got replaced and did not work at all. Another copier worked better with denaturalized alcohol and wintergreenoil. Do do some testing!
As I said, its all been said before! So I only hope my picture's help a bit.

Daniel
Thanks for the tutorial, it helps a lot.
I have used HP4500 Laserprinter, and it works fine.

regards
Jens
Reply With Quote
  #10  
Old 11-29-2011, 11:30 AM
ulrigg ulrigg is offline
Steel
 
Join Date: May 2010
Location: The Woods, WA
Posts: 27
Default Re: Lasercopy transfer

I've done a similar type transfer onto metal, but using slightly different materials.


For the printing portion, rather than using vellum or parchment, I used the waxy paper that is under a set of laser printer labels(from a company like Avery). So print up your Christmas letter address labels (or insert holiday of choice here), and save the backing paper.

For getting the toner off the wax, buy a can of 3m Super 77 spray adhesive.

1. Print a reverse image of your artwork to the waxy paper.

2. Spray the metal plate with a layer of Super 77.

3. Put the wax paper with the toner side down (ha!) onto the metal plate, and burnish (still learning the engraving lingo, I think burnish is what I want. In other words, rub the backside of the paper so that you are pushing the toner onto the metal plate).

4. Slowly peel the wax paper off. Slowly, so that if you missed any area, you can put it back down and rub the back to transfer the toner.

Once your artwork is transferred, let it sit until the spray adhesive is no longer tacky, and your done.

Regards

u
Reply With Quote
  #11  
Old 01-05-2012, 07:13 AM
akintagleocarving akintagleocarving is offline
Steel
 
Join Date: Oct 2011
Location: Zurich, Switzerland
Posts: 28
Send a message via Skype™ to akintagleocarving
Thumbs up Re: Lasercopy transfer

Daniel. Great work and great tutorial.
Thanks for this help.
If you dont mind us telling where do you get these pictures printed from.If its a book can you give us a name or link on the website.
No pressure only if you like to share this information.
AK
Reply With Quote
  #12  
Old 01-05-2012, 12:32 PM
Daniel Houwer's Avatar
Daniel Houwer Daniel Houwer is offline
Platinum
 
Join Date: Mar 2008
Location: Haarlem, Holland
Posts: 2,125
Send a message via Skype™ to Daniel Houwer
Default Re: Lasercopy transfer

Hi AK.
I am glad you liked it and hope its of some use to you.
Like most of the tutorials posted here we make them ourselves in our workshop with our own camera. So there is no book that they come from.
It could be nice to start rounding these tutorials up and putting them in a digibook or something. Or make a list of things that tutorials could be made of.
There are some gems among these tutorials here that would deserve a book
__________________
The best things in life are still made by hand.
Daniël's Photo Album
Reply With Quote
  #13  
Old 01-06-2012, 04:10 PM
akintagleocarving akintagleocarving is offline
Steel
 
Join Date: Oct 2011
Location: Zurich, Switzerland
Posts: 28
Send a message via Skype™ to akintagleocarving
Post Re: Lasercopy transfer

Daniel
Thank you for your reply.
Also can you let me know the prints you transfer on the plates!
The Logos and vintage vector art work Where did you get them was it from the book ? Can you let me know the name?
Kind regards

AK
Reply With Quote
  #14  
Old 01-06-2012, 06:25 PM
Cookie Cookie is offline
Gold
 
Join Date: Mar 2010
Location: Indiana
Posts: 131
Default Re: Lasercopy transfer

Daniel,
Thank -you for demonstrating your transfer technic with photo back -up. It really helps to understand the process and of course stimulates the input of others viewers. Thanks to all . Cookie
Reply With Quote
  #15  
Old 01-08-2012, 03:41 AM
Daniel Houwer's Avatar
Daniel Houwer Daniel Houwer is offline
Platinum
 
Join Date: Mar 2008
Location: Haarlem, Holland
Posts: 2,125
Send a message via Skype™ to Daniel Houwer
Default Re: Lasercopy transfer

Hi AK,
The monograms came from this book
http://www.amazon.com/Monograms-Pepi.../dp/9054960450
But this book is alo very nice to have.
http://www.amazon.com/Monograms-Alph.../dp/0486223302
__________________
The best things in life are still made by hand.
Daniël's Photo Album
Reply With Quote
  #16  
Old 01-08-2012, 12:53 PM
akintagleocarving akintagleocarving is offline
Steel
 
Join Date: Oct 2011
Location: Zurich, Switzerland
Posts: 28
Send a message via Skype™ to akintagleocarving
Thumbs up Re: Lasercopy transfer

Daniel
Thank you vey much for your great help in this matter. I will definately look to buy these two books. I love the monograms you have transferred.
Speak to you soon.
AK
Reply With Quote
  #17  
Old 03-10-2012, 11:20 PM
ulrigg ulrigg is offline
Steel
 
Join Date: May 2010
Location: The Woods, WA
Posts: 27
Default Re: Lasercopy transfer

I've been playing with the acetone transfer a bit. What I learned this evening is that it works best transferring to a smooth surface.

The metal practice plate I was using was too rough, the toner wasn't finding anything to stick to.

I sanded it down with a progression of papers, cleaned it well, and the transfer then worked great.

Hope this helps someone out there.

u
Reply With Quote
  #18  
Old 02-21-2013, 03:49 PM
AdamDCole AdamDCole is offline
Steel
 
Join Date: Feb 2013
Location: NorCal
Posts: 27
Default Re: Lasercopy transfer

What printer did you have success with?
Reply With Quote
  #19  
Old 02-25-2013, 06:00 PM
Daniel Houwer's Avatar
Daniel Houwer Daniel Houwer is offline
Platinum
 
Join Date: Mar 2008
Location: Haarlem, Holland
Posts: 2,125
Send a message via Skype™ to Daniel Houwer
Default Re: Lasercopy transfer

I use the Photosmart from HP these days.
before I used the epson stylus but forgot the number.
__________________
The best things in life are still made by hand.
Daniël's Photo Album
Reply With Quote
  #20  
Old 03-13-2013, 10:28 PM
AdamDCole AdamDCole is offline
Steel
 
Join Date: Feb 2013
Location: NorCal
Posts: 27
Default Re: Lasercopy transfer

For your reference I am using the Brother HL-2230 laser printer with regular acetone nail polish remover and it is working great. The method I have to use with it is to wrap the paper over the metal and then soak it with acetone. I then VERY gently pull at an edge of the paper and it sucks the paper down tight to the metal. With a brush dipped in acetone I brush out any remaining bubbles and with the paper still really wet with acetone I lay another flat piece of metal over it. After about 10 minutes I check to see if the paper is MOSTLY dry but not completely. It should have a very slight damp feeling to it. I then run water over it while gently rubbing the paper. The paper quickly dissolves and leaves a perfect transfer.

Make sure the printer isn't set to "toner save mode" and print your lines rather thick.
Reply With Quote
  #21  
Old 03-14-2013, 03:21 PM
Chris Botha's Avatar
Chris Botha Chris Botha is offline
Platinum
 
Join Date: Jul 2012
Location: Australia, Melbourne
Posts: 322
Default Re: Lasercopy transfer

From my previous posts you might have seen me struggling to get my HP laser to do this, at best I was getting a very light transfer amend needed to view at an angle to get enough contrast for engraving, most annoying, but my wife's voracious cookbook printing finished my toner and she replaced it with a cheap knockoff toner on eBay.. Now its perfect, its like I have printed straight onto the metal. A quick rub with a cotton swab dipped in acetone, not too m ch, just damp and I dab it, blow dry, dab, blow, dab, blow etc etc. At work now will add printer model $79 from office works and the eBay toner if we can backtrack the invoice.
__________________
Most human beings only think they want freedom. In truth they yearn for the bondage of social order, rigid laws, materialism, the only freedom man really wants, is the freedom to become comfortable. - (Sons of Anarchy)
Reply With Quote
  #22  
Old 03-16-2013, 04:29 PM
Chris Botha's Avatar
Chris Botha Chris Botha is offline
Platinum
 
Join Date: Jul 2012
Location: Australia, Melbourne
Posts: 322
Default Re: Lasercopy transfer

ok found the info.

The laser printer is a Xerox Phaser 3160

the original toner is useless but the ebay replacement toner was from

http://www.ebay.com.au/itm/1x-Fuji-X...#ht_500wt_1135

and it seems like the cheaper and nastier the replacement toner is, the better it works...
__________________
Most human beings only think they want freedom. In truth they yearn for the bondage of social order, rigid laws, materialism, the only freedom man really wants, is the freedom to become comfortable. - (Sons of Anarchy)
Reply With Quote
  #23  
Old 08-11-2013, 05:56 AM
S.Strongitharm S.Strongitharm is offline
Steel
 
Join Date: Jan 2012
Location: Winchester, Hampshire, UK
Posts: 18
Default Re: Lasercopy transfer

G'afternoon everyone,

Seeing as I had trouble finding a printer that would do the 'acetone' transfer method, thought I'd post that I just bought a Brother DCP-7055 - a cheap all-in-one device - and it works great.

S
Reply With Quote
  #24  
Old 09-29-2013, 02:26 PM
leonel leonel is offline
Steel
 
Join Date: Jun 2013
Location: jersey city
Posts: 87
Default Re: Lasercopy transfer

another one is the cannon photo smart they usually sell it in Walmart for about 55 dollar great and the ink for both cartridge color and black is about 50 but you bring the old one to staple an refilled them for about 15
Reply With Quote
  #25  
Old 02-29-2016, 08:05 AM
Mark Diorio Mark Diorio is offline
Steel
 
Join Date: Feb 2016
Location: Vineland, NJ
Posts: 98
Default Re: Lasercopy transfer

Thank you so much for thr tutorial.
Reply With Quote
  #26  
Old 04-28-2016, 10:18 PM
Omar Haltam's Avatar
Omar Haltam Omar Haltam is offline
Steel
 
Join Date: Jan 2014
Location: Raleigh, NC
Posts: 65
Default Re: Lasercopy transfer

That is a Beautiful trasfer, i hope to try that tomorrow
Reply With Quote
  #27  
Old 12-15-2016, 02:11 PM
Dankwun Dankwun is offline
Copper
 
Join Date: Dec 2016
Location: Ft. Lauderdale
Posts: 3
Default Re: Lasercopy transfer

I went out and bought a Brother L2380 the other night and tried to get a transfer to work using it. I tried printing on plain white paper, wax paper, and the back part of a shipping label and couldnt get any of them to transfer using Acetone. Anyone recently purchase a printer that this method works with? Looking to return this one and get one that will work with this method.
Reply With Quote
  #28  
Old 12-16-2016, 03:38 AM
SEngraver SEngraver is offline
Platinum
 
Join Date: Sep 2008
Location: UK.
Posts: 3,484
Default Re: Lasercopy transfer

Hi Dankwun
A b/w printer laser printer should work .I have had good results with a HL-2035 b/w brother printer and with lighter fluid
with windsor newton damar varnish mix and silicone baking paper .I have not changed the printer since then.
But you have to tweak this to work for you ?


http://www.engravingschool.com/private/transfers.htm

SE
__________________
Learn from those who know more than you do and teach those who know less than you do. - I.M.
Reply With Quote
  #29  
Old 12-16-2016, 06:51 AM
JoeJacob JoeJacob is offline
Steel
 
Join Date: Jun 2009
Posts: 87
Default Re: Lasercopy transfer

Brother printers use a different type of toner that HP printers. I have tried all sorts of solvents including some specialty industrial ones, nothing works.
However, when my Brother printer ran out of toner I purchased a refill kit off of eBay. The toner in the refill kit worked with acetone and did a good transfer. Obviously the refill kit did not contain original Brother toner, but the printer works just fine.
Brother printers are way easier to refill than HP, which makes them probably the lowest cost per page laser printer.
__________________
Joe

If we knew what we were doing, it wouldn't be called research, would it? Albert Einstein
Reply With Quote
  #30  
Old 12-16-2016, 02:04 PM
zota zota is offline
Steel
 
Join Date: Oct 2009
Location: Ploiesti .Ro
Posts: 77
Default Re: Lasercopy transfer

Hello guys. Why recommend laser printers
__________________
Ilie
Reply With Quote
  #31  
Old 03-19-2017, 12:44 AM
josephnmora josephnmora is offline
Steel
 
Join Date: Jan 2014
Location: Greeley, Colorado
Posts: 13
Default Re: Lasercopy transfer

cool. I will have to try this. Have a BB gun I need to come up with some design i can put on it so i can work my way up on design for different gun. Have a Brothers laser printer.

A few years back when I did pens ( on the wood lathe, pen inserts etc.) and had my student transfer the school name on the pen using a laser printer. Use a solder/wood burner pen to head the back side of the paper and lift the paper a little till we could see if all the carbon or what ever the Toner is made of to the wood. Then Lacquer /seal it.
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Conduct
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -6. The time now is 09:09 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.