Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community

The Internet's Largest and Fastest Growing Engraving Community
Discuss hand engraving using basic to the most advanced methods and equipment
Forum Members: 14,763. Welcome to our newest member, mtan1446
EngravingForum.com - Domain since Feb 7, 2003

Graver Video Conferencing is empty Join now!


Go Back   Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community > Forums > WaterCooler
ENGRAVING TOOLS - Paypal accepted Classes Glossary Feedback Tips Sharpening Bulino Videos Forum Policies

Reply
 
Thread Tools
  #1  
Old 02-05-2009, 12:07 AM
WVEngraver's Avatar
WVEngraver WVEngraver is offline
Platinum
 
Join Date: Apr 2008
Location: Tennessee
Posts: 1,656
Default Grounds For Divorce ... maybe ...

.... if it were a black powder frame SAA, I might say definitely.

This is a Colt double action revolver that came into the shop last week. I believe it's an early Model 1901 U.S. military. If it is military, I've seen these price up to $2000 bucks or so.

Evidently it was in near perfect condition until the owner's new wife decided she didn't like firearms and hid it under a hot water heater in the basement.

So now it goes into a bath of "Evapo-Rust" and we'll see how it looks in a couple of days ...... this should be interesting.



Reply With Quote
  #2  
Old 02-05-2009, 03:30 AM
Daniel Houwer's Avatar
Daniel Houwer Daniel Houwer is offline
Platinum
 
Join Date: Mar 2008
Location: Haarlem, Holland
Posts: 2,125
Send a message via Skype™ to Daniel Houwer
Default Re: Grounds For Divorce ... maybe ...

Pour thing
Well look at the bright side, you can always put some overlay's on the bad spots.
Hmm, on the other hand that could drain the national gold reserve.

Good luck with this one.

Daniel
__________________
The best things in life are still made by hand.
Daniël's Photo Album
Reply With Quote
  #3  
Old 02-05-2009, 06:30 AM
FlatBrokeForge's Avatar
FlatBrokeForge FlatBrokeForge is offline
Steel
 
Join Date: Sep 2008
Location: West "By God" Virginia, wanna fight about it?
Posts: 46
Default Re: Grounds For Divorce ... maybe ...

AAAHhhhhh, my eyes!!!!! :willy_nilly:

Kinda makes a person :sick:
Reply With Quote
  #4  
Old 02-05-2009, 06:56 AM
M. J. Atkinson M. J. Atkinson is offline
Steel
 
Join Date: May 2007
Posts: 42
Default Re: Grounds For Divorce ... maybe ...

Check that thing out carefully before you put any time into it. Not claiming to be the resident expert, but look at the cylinder latch. I don't think Colt made anything that crude. Had one brought to my shop a while back that looked identical to that one that had absolutely no identifying marks. It was a Spanish copy that I wouldn't shoot by proxy. Might make good practice material. Here endeth the epistle. Mike
Reply With Quote
  #5  
Old 02-05-2009, 07:33 AM
JJ Roberts's Avatar
JJ Roberts JJ Roberts is offline
Platinum
 
Join Date: Apr 2006
Location: Northern Virginia
Posts: 2,070
Default Re: Grounds For Divorce ... maybe ...

Chris...I think MJ is right..that does look like a Spanish pistol. I got one here a dealer gave me out of his junk box. That pistol you have is beyond restoration. Give it back to the man..he could use it as a paper weight, and a good reminder to his new bride not to touch his stuff. I had a man come to me about two years ago with a Ruger singe shot rifle..it was one of many guns that his Mother-in-Law stuck in a closet next to a hot water heater...30 guns were affected. He told me the Ruger was the better of the lot...the metal could have been restored but the wood would have to be replaced. When his Father-in-Law died he wanted to look at the guns, and the Mother-in-Law refused to let him near them. Sounds to me like the old gent HAD quite a collection. This is what happens when guns get into the wrong hands, and stored in the wrong places...attics, basements, storage sheds.

JJ
Reply With Quote
  #6  
Old 02-05-2009, 07:33 AM
WVEngraver's Avatar
WVEngraver WVEngraver is offline
Platinum
 
Join Date: Apr 2008
Location: Tennessee
Posts: 1,656
Default Re: Grounds For Divorce ... maybe ...

Hi Daniel .... there's no engraving for this old clunker. Just gotta clean it up and get the action working.

------

Aaron .... thanks for the "magic stuff" tip. It still has a looooong way to go.

------

It's a Colt. Some of the markings are/were crisp ..... the Rampant Colt at the back of the frame, the "Colt's Patent Firearms" and cartouches are all correct.

Everything is right for a military DA Colt .... except for the caliber which I can't make out yet.

-----

Hi JJ. It's got Colt markings all over it under the rust. I agree completely, it's beyond fixing. Anyway .... it's been in the "Evapo-Rust" bath all night. The customer insisted that I make the attempt to clean it up ..... what the heck, it's money.

You're right about the "wrong hands" too. Destroying a piece of history should be a crime.

Here's a link to the same model gun that is for sale on Guns International.

http://www.gunsinternational.com/det...&string=cid=76

Here's another web site that tell a little bit about a Navy version of this Colt.

http://coolgunsite.com/pistols/navy1889/m1889navy.htm

I'll have more info and actual pictures of this as soon as I can make out the serial number. It's gonna need another day soaking in the magic stuff.


Chris
Reply With Quote
  #7  
Old 02-06-2009, 10:57 AM
Roger Bleile's Avatar
Roger Bleile Roger Bleile is offline
Platinum
 
Join Date: Feb 2008
Location: Kentucky
Posts: 1,709
Default Re: Grounds For Divorce ... maybe ...

As a former collector of pre-WWII Colt double action revolvers, I can tell you that the "flat latch" is correct to to that gun. They do look a little crude for a Colt which, after WWI changed to the more recognizable rounded, knurled latch. After WWII Colt changed the latch again to a rounded one without knurling.

CRB
__________________
C. Roger Bleile
Author of: American Engravers series of books. FEGA Historian and Founding Charter Member
http://www.engravingglossary.com/
Reply With Quote
  #8  
Old 02-14-2009, 10:39 PM
WVEngraver's Avatar
WVEngraver WVEngraver is offline
Platinum
 
Join Date: Apr 2008
Location: Tennessee
Posts: 1,656
Default Installment 2 of ....

... a classic old shooter to s**t.

Just pulled this old rusty clunker from the Evapo-Rust bath. I left it in for a week, occasionally taking the black crap off with a wire brush and then I forgot about it for a few days more.

The cylinder now opens and spins with the assistance of a pair of vise grips. The trigger and hammer also move. As soon as I get it apart, I'll have it working perfectly then I'll take sand paper to the pitting.

Would I shoot it? Hell yes!! .... but only if it is tied to the oak tree out back. The bore and chambers are mint but the pitting is a little deep on one side of the cylinder. There's enough meat to withstand a low pressure cowboy or black powder load.

It's a .41 Long Colt commercial model. Probably worth $600 to $900 bucks in great shape. This particular example might fetch $10 bucks in spare parts and scrap. The owner's wife is still gonna pay for it cleaned up so it looks like the marriage is saved. My investment - $20 bucks for Evapo-Rust and a little spare time tinkering.

I have to admit .... Evapo-Rust rocks. http://www.evapo-rust.com/




Just in case you guys still don't take my word for it .... here's the rampant Colt above the grip (or what's left of it ... what a shame). :[1]:




disclaimer: I am not a spokesperson for Harris International Labs (the makers of Evapo-Rust) paid or otherwise.
Reply With Quote
  #9  
Old 02-15-2009, 06:50 AM
Peter Peter is offline
Platinum
 
Join Date: Apr 2006
Posts: 640
Default Re: Installment 2 of ....

Evapo-rust is obviously some effective stuff! I'll have to remember that name.

I would never have thought it would get nearly as good as it looks now.

Thanks for posting it.

Peter
Reply With Quote
  #10  
Old 02-15-2009, 01:17 PM
FlatBrokeForge's Avatar
FlatBrokeForge FlatBrokeForge is offline
Steel
 
Join Date: Sep 2008
Location: West "By God" Virginia, wanna fight about it?
Posts: 46
Default Re: Grounds For Divorce ... maybe ...

Found this in my 1908 Sears and Roebuck catalog. So, is it a Colt or not?
Attached Images
File Type: jpg coltsnewmodel.jpg (138.3 KB, 38 views)
Reply With Quote
  #11  
Old 02-15-2009, 03:17 PM
Silverchip's Avatar
Silverchip Silverchip is offline
Steel
 
Join Date: May 2007
Posts: 40
Default Re: Grounds For Divorce ... maybe ...

Better just weld the cylinder shut and call it good. At least you might get paid to make it into a safe curiousity that can hang in her kitchen for a reminder not to play with -----------------------

What a sad story
Reply With Quote
  #12  
Old 02-15-2009, 10:38 PM
WVEngraver's Avatar
WVEngraver WVEngraver is offline
Platinum
 
Join Date: Apr 2008
Location: Tennessee
Posts: 1,656
Default Re: Grounds For Divorce ... maybe ...

Peter, amazingly ... the stuff is bio-degradable and non-toxic. A little slow but worth the wait. Looking forward to using this stuff on one of my own restorations rather than using a sand/bead blast.

Hey Vern ... that old catalog is a treasure of engraved illustrations.

Hi Dave, this sure made for a good experiment in "set it and forget it" rust removal. You make a very good point for safety reasons ... unless the guy's wife is hoping he will shoot it and blow himself up.:[1]:
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Conduct
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -6. The time now is 10:46 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.