Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community

The Internet's Largest and Fastest Growing Engraving Community
Discuss hand engraving using basic to the most advanced methods and equipment
Forum Members: 14,761. Welcome to our newest member, Bruno
EngravingForum.com - Domain since Feb 7, 2003

Graver Video Conferencing is empty Join now!


Go Back   Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community > Forums > Lindsay AirGraver Info - Hand Engraving Forum
ENGRAVING TOOLS - Paypal accepted Classes Glossary Feedback Tips Sharpening Bulino Videos Forum Policies

Reply
 
Thread Tools
  #1  
Old 08-31-2007, 10:50 AM
Barry Lee Hands's Avatar
Barry Lee Hands Barry Lee Hands is offline
Platinum
 
Join Date: Feb 2007
Location: Bigfork, Montana
Posts: 1,399
Default Damascening an Elk with an Artisan

1 Here are the parts and a photo I took of a mounted Elk.

2 Next the Elk is scribed on with a pantograph, then modified for artistic merit with a scribe. Then I cut the outline with the Lindsay Artisan handpiece.

3 Next I scanned the outline which I cut and put the floorplate and the printed scan on the Pantograph to get the ratios correct so I can scribe it as I cut it, onto the gold.

4 Then pantograph it on the 24k gold.

5 After that I cut a line around it to give the jewelers saw an easy path to follow.

6 Next saw it out.

7 ready to be damascened.

8 raising a burr field inside the outline of the Elk.

9 The gold is annealed.

10 I punch the Elk down, started at the farthest points, the antler tips etc, and work my way in, hammering away.

11 all punched down, next it is sanded with 600 grit backed by a rubber block.

12 The Bulino is begun using a 70 degree tool with a lot of draft.

13 the scrolls are laid out.

14 the scrolls are cut.

15 the leaves are cut

16 The backgound behind the elk is blasted with aluminum oxide.

17 Finished.

18 The finished floorplate and triggerguard.



















__________________
Barry Lee Hands
www.barryleehands.com
"Critics gather, they discuss aesthetics, Artists gather, they discuss turpentine. . ."- Pablo Picasso
Reply With Quote
  #2  
Old 08-31-2007, 11:19 AM
Tim Wells's Avatar
Tim Wells Tim Wells is offline
Moderator
 
Join Date: Aug 2006
Location: Potlatch, ID
Posts: 1,080
Default Re: Damascening an Elk with an Artisan

Barry,

I really like your style of scroll. The tutorials are worth their weight in gold. Thanks for going to the trouble to document this project. Next time I ride up in your part of the country I gotta stop by for some pointers.

Nice job!:whoo:
__________________
"If one needs a tool, and does not acquire it, they end up paying for it, but not having it." - Henry Ford
Reply With Quote
  #3  
Old 08-31-2007, 11:43 AM
D.DOUGLAS's Avatar
D.DOUGLAS D.DOUGLAS is offline
Platinum
 
Join Date: Feb 2007
Location: Princeville Illinois Central part
Posts: 285
Default Re: Damascening an Elk with an Artisan

Barry, This is great stuff! Thanks
Reply With Quote
  #4  
Old 08-31-2007, 01:26 PM
Steve Ellsworth's Avatar
Steve Ellsworth Steve Ellsworth is offline
Platinum
 
Join Date: Apr 2006
Location: Pleasantville Iowa
Posts: 784
Default Re: Damascening an Elk with an Artisan

Is it possible that you have us out gunned in the area of tools
__________________
CoinCutter
Reply With Quote
  #5  
Old 08-31-2007, 07:42 PM
ron ron is offline
Platinum
 
Join Date: Apr 2006
Location: harrisburg pa
Posts: 780
Default Re: Damascening an Elk with an Artisan

hi Barry and thanks for all of that info .. what are you using to hold the gold in place while you engrave it what is that gray material around the gold plate .... ron p.
Reply With Quote
  #6  
Old 08-31-2007, 07:59 PM
Barry Lee Hands's Avatar
Barry Lee Hands Barry Lee Hands is offline
Platinum
 
Join Date: Feb 2007
Location: Bigfork, Montana
Posts: 1,399
Default Re: Damascening an Elk with an Artisan

Thanks Tim, D,Steve and Ron, the grey stuff is modeling clay, it holds it good enough to scribe the design on.
__________________
Barry Lee Hands
www.barryleehands.com
"Critics gather, they discuss aesthetics, Artists gather, they discuss turpentine. . ."- Pablo Picasso
Reply With Quote
  #7  
Old 09-01-2007, 09:03 AM
Zernike Au's Avatar
Zernike Au Zernike Au is offline
Platinum
 
Join Date: Jul 2007
Location: Hong Kong
Posts: 320
Default Re: Damascening an Elk with an Artisan

Barry, thanks for showing your excellent works again.

I really want to try.... (the lettering that you shown in your "Perazzi in Progress")but the gold is expensive, I have no idea what is the price, here in Hong Kong, a jewerlly tools supply can help to get some but their price are floating, I still not ready to give a try so I didn't ask them to quote the price. It seems too waste to use it for prastise, for those who are new to this kind of technique, what else material you suggest they use for practise before they use real gold on a real object? Or any other suggestion? Did you use gold for the first time you damascening?

Just curious, will you collect the gold chips after engraving on gold? how you handle the left gold after you saw out the shape of the deer? metling it?

Would you mind to tell what is the cost for the gold you used for the deer in this project so I can have a rough idea...? Do you need to stock different thinkness of gold for different project (please accept my apologize if the question is repeated as the forum's information is too massive and I still cannot read over them)?

Many thanks in advance.

Zernike
Reply With Quote
  #8  
Old 09-01-2007, 09:54 AM
Dave P Dave P is offline
Steel
 
Join Date: Jul 2007
Location: Durham, NC
Posts: 38
Default Re: Damascening an Elk with an Artisan

Pretty neat transfer method. Did you get that little tool from Lindsay?
Reply With Quote
  #9  
Old 09-01-2007, 11:03 AM
Barry Lee Hands's Avatar
Barry Lee Hands Barry Lee Hands is offline
Platinum
 
Join Date: Feb 2007
Location: Bigfork, Montana
Posts: 1,399
Default Re: Damascening an Elk with an Artisan

The gold in the Perrazzi is only $100 or so. It costs about $2 per inch for wire of that size, so it is very inexpensive.
You can use copper for practice, from telephone wire, or fine silver 999fine, it is very soft and cheap.
I have always used gold, I never really practiced much, just do it.
I save the big pieces of gold scrap, the little pieces land on the floor and are thrown away, hehe. I remelt the large ones, small wire scraps, and roll them out with a mill to the thickness required.
I never pull wire, I just buy it.
I would guess there might be $100 dollars of raw gold in the Elk at the very most. The value is in the work.
__________________
Barry Lee Hands
www.barryleehands.com
"Critics gather, they discuss aesthetics, Artists gather, they discuss turpentine. . ."- Pablo Picasso
Reply With Quote
  #10  
Old 09-01-2007, 12:43 PM
Vanknife Vanknife is offline
Platinum
 
Join Date: Mar 2007
Location: Florauna Park Pretoria South Africa
Posts: 350
Default Re: Damascening an Elk with an Artisan

Barry that is stunning work and thanks for sharing the method of transfer and the inlay.
Reply With Quote
  #11  
Old 09-02-2007, 12:15 AM
Zernike Au's Avatar
Zernike Au Zernike Au is offline
Platinum
 
Join Date: Jul 2007
Location: Hong Kong
Posts: 320
Default Re: Damascening an Elk with an Artisan

Barry, thank you for the information. :yesnod:

Zernike
Reply With Quote
  #12  
Old 05-01-2009, 06:13 PM
mckeenh's Avatar
mckeenh mckeenh is offline
Platinum
 
Join Date: Mar 2008
Location: Stevensville, Mt
Posts: 812
Default Re: Damascening an Elk with an Artisan

Barry, I have been trying your damascening and am not having any success. I am using copper and brass, I anneal them before I try to place them. I am undercutting the circumfrence, I am cross hatching with a flat with 45 degree face and no heel. I can and do inlay with 30 thou material but this 10 thou is causing me fits. I could be cutting my outline too deep. Also what saw blade are you using in your jewelers saw. I have no. 3 and it hasn't enough teeth per inch to cut the 10 thou material smoothly.

Neil
Reply With Quote
  #13  
Old 05-01-2009, 08:33 PM
Dave London's Avatar
Dave London Dave London is offline
Platinum
 
Join Date: Apr 2006
Location: Colorado Springs
Posts: 2,360
Default Re: Damascening an Elk with an Artisan

Barry
Thanks for the great tutorial, beautiful work, Dave
Reply With Quote
  #14  
Old 05-01-2009, 09:15 PM
Jroettger's Avatar
Jroettger Jroettger is offline
Platinum
 
Join Date: Apr 2006
Location: Minneapolis Minnesota
Posts: 678
Default Re: Damascening an Elk with an Artisan

Great work and distinctive design. It has a certain "field tough" look that doesn't look like it would intimidate people from actually using the finished gun. It looks practical as well as beautiful.
I am curious, is all the "raised relief" on the elk caused by the raised burr field alone? I can't be 100% certain from the photos alone.
Thanks.
Reply With Quote
  #15  
Old 05-02-2009, 01:04 AM
rod rod is offline
Platinum
 
Join Date: May 2006
Posts: 623
Default Re: Damascening an Elk with an Artisan

Barry,

A tutorial with great clarity. Thank you for the time and careful preparation it takes to generously post this for us.

Rod
Reply With Quote
  #16  
Old 05-02-2009, 08:54 AM
Barry Lee Hands's Avatar
Barry Lee Hands Barry Lee Hands is offline
Platinum
 
Join Date: Feb 2007
Location: Bigfork, Montana
Posts: 1,399
Default Re: Damascening an Elk with an Artisan

Neil, you cant do this very well with brass, and copper is not as easy as gold, and in damascening, the thinner and flatter, the better. I dont know what saw blades I use but they are vey fine.
Jroettger, the raised relief is the thickness of the gold, the burr field is very fine in damascene.
Thanks guys. . . .
__________________
Barry Lee Hands
www.barryleehands.com
"Critics gather, they discuss aesthetics, Artists gather, they discuss turpentine. . ."- Pablo Picasso
Reply With Quote
  #17  
Old 05-02-2009, 09:20 AM
mckeenh's Avatar
mckeenh mckeenh is offline
Platinum
 
Join Date: Mar 2008
Location: Stevensville, Mt
Posts: 812
Default Re: Damascening an Elk with an Artisan

thanks Barry, I guess I will just have to bite the bullet and use some gold. unless some silver will work?

Neil
Reply With Quote
  #18  
Old 05-02-2009, 09:32 AM
Barry Lee Hands's Avatar
Barry Lee Hands Barry Lee Hands is offline
Platinum
 
Join Date: Feb 2007
Location: Bigfork, Montana
Posts: 1,399
Default Re: Damascening an Elk with an Artisan

.999 fine silver will work
__________________
Barry Lee Hands
www.barryleehands.com
"Critics gather, they discuss aesthetics, Artists gather, they discuss turpentine. . ."- Pablo Picasso
Reply With Quote
  #19  
Old 05-03-2009, 10:55 AM
david.feng david.feng is offline
Copper
 
Join Date: May 2009
Posts: 4
Default Re: Damascening an Elk with an Artisan

wow.

it is so beautiful.

I like it
Reply With Quote
  #20  
Old 05-03-2009, 07:04 PM
Jroettger's Avatar
Jroettger Jroettger is offline
Platinum
 
Join Date: Apr 2006
Location: Minneapolis Minnesota
Posts: 678
Default Re: Damascening an Elk with an Artisan

Thanks for the reply Mr. Hands.
Reply With Quote
  #21  
Old 05-03-2009, 08:08 PM
jerrywh jerrywh is offline
Steel
 
Join Date: Jul 2008
Posts: 17
Default Re: Damascening an Elk with an Artisan

Barry
How do you mask the gold elk when blasting the background????
Reply With Quote
  #22  
Old 05-03-2009, 09:25 PM
Barry Lee Hands's Avatar
Barry Lee Hands Barry Lee Hands is offline
Platinum
 
Join Date: Feb 2007
Location: Bigfork, Montana
Posts: 1,399
Default Re: Damascening an Elk with an Artisan

I think I blasted the Elk also, but if I masked it, I used packing tape.
__________________
Barry Lee Hands
www.barryleehands.com
"Critics gather, they discuss aesthetics, Artists gather, they discuss turpentine. . ."- Pablo Picasso
Reply With Quote
  #23  
Old 05-03-2009, 10:26 PM
Curtis Wilson Curtis Wilson is offline
Gold
 
Join Date: Apr 2009
Posts: 122
Default Re: Damascening an Elk with an Artisan

Just wanted to say that the tutorial as well as the work was done bueatifully, and a lot of information.
Thanks,
Curtis Wilson
Reply With Quote
  #24  
Old 05-04-2009, 12:16 PM
Dave London's Avatar
Dave London Dave London is offline
Platinum
 
Join Date: Apr 2006
Location: Colorado Springs
Posts: 2,360
Default Re: Damascening an Elk with an Artisan

Here is my first attempt at damascening, flowers on a tsuba in fine silver. Dave PS Barry better look out here I come
Attached Images
File Type: jpg DSC_0184.JPG (151.5 KB, 0 views)
Reply With Quote
  #25  
Old 05-06-2009, 01:49 PM
mdengraver mdengraver is offline
Steel
 
Join Date: Feb 2009
Posts: 32
Default Re: Damascening an Elk with an Artisan

Barry what kind of pantograph would you recommend for this process?
I would assume it would need to have a sensitive touch. The hermes pantograph for lettering in my opinion is too heavy for scaling unless you have a template?
Reply With Quote
  #26  
Old 05-06-2009, 03:40 PM
Barry Lee Hands's Avatar
Barry Lee Hands Barry Lee Hands is offline
Platinum
 
Join Date: Feb 2007
Location: Bigfork, Montana
Posts: 1,399
Default Re: Damascening an Elk with an Artisan

I use a cronite universal, but you can get along by doing acetone transfers, I do them quite often also.
__________________
Barry Lee Hands
www.barryleehands.com
"Critics gather, they discuss aesthetics, Artists gather, they discuss turpentine. . ."- Pablo Picasso
Reply With Quote
  #27  
Old 05-07-2009, 03:26 PM
KnifeEngraver KnifeEngraver is offline
Steel
 
Join Date: Apr 2006
Posts: 14
Default Re: Damascening an Elk with an Artisan

What is the thickness of the gold? and where did you purchase the gold?
Reply With Quote
  #28  
Old 05-07-2009, 11:32 PM
Barry Lee Hands's Avatar
Barry Lee Hands Barry Lee Hands is offline
Platinum
 
Join Date: Feb 2007
Location: Bigfork, Montana
Posts: 1,399
Default Re: Damascening an Elk with an Artisan

I dont remember exactly.
Maybe .006-.010
I bought that gold in the form of a canadian maple leaf, and rolled it out with a rolling mill.
You can get whatever you like from Hoover and Strong.
__________________
Barry Lee Hands
www.barryleehands.com
"Critics gather, they discuss aesthetics, Artists gather, they discuss turpentine. . ."- Pablo Picasso
Reply With Quote
  #29  
Old 05-15-2014, 11:13 AM
Pmned Pmned is offline
Copper
 
Join Date: May 2014
Location: Spain
Posts: 4
Default Re: Damascening an Elk with an Artisan

Really nice, i like it. The black in the carved parts, how is that done!?
Reply With Quote
  #30  
Old 02-10-2015, 10:31 AM
rosco rosco is offline
Steel
 
Join Date: Jun 2013
Location: chester n.h.
Posts: 14
Default Re: Damascening an Elk with an Artisan

very nice work Barry, thank you for sharing that tutorial with us. beautifully done, i don't think it could have been told and shown any easier to understand. thanks again
Reply With Quote
  #31  
Old 05-04-2015, 11:23 AM
Clyde Taylor Clyde Taylor is offline
Copper
 
Join Date: Mar 2013
Location: Flippin, AR 72634
Posts: 5
Default Re: Damascening an Elk with an Artisan

Barry, Thank you for sharing your knowledge and methods as you do. I've been a serious student of engraving for a couple of years now. Tried in the 70's but info was scant. I'm currently cutting my first pistol, a Ruger Bisley in stainless(damn that loading gate!) I'm doing hammer and chisel with carbalt tools. I have learned more cutting this gun than all the previous cutting I've done! Before starting this gun I may have had a shot at heaven,now maybe not! Thanks again for the info and inspiration.
Reply With Quote
  #32  
Old 02-18-2016, 10:03 PM
Omar Haltam's Avatar
Omar Haltam Omar Haltam is offline
Steel
 
Join Date: Jan 2014
Location: Raleigh, NC
Posts: 65
Default Re: Damascening an Elk with an Artisan

beautiful work as usual, thank you Barry for showing us your techniques, it really helps us become more knowledgeable and informed of the different techniques available.
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Conduct
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -6. The time now is 01:00 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.