Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community

The Internet's Largest and Fastest Growing Engraving Community
Discuss hand engraving using basic to the most advanced methods and equipment
Forum Members: 14,732. Welcome to our newest member, Miss Allison
EngravingForum.com - Domain since Feb 7, 2003

Graver Video Conferencing is empty Join now!


Go Back   Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community > Forums > Gallery and Show & Tell - Hand Engraving Forum
ENGRAVING TOOLS - Paypal accepted Classes Glossary Feedback Tips Sharpening Bulino Videos Forum Policies

Reply
 
Thread Tools
  #1  
Old 07-15-2010, 05:13 AM
Damien Connolly Damien Connolly is offline
Steel
 
Join Date: May 2010
Location: Andover, Vermont
Posts: 42
Default Bulino Relief Cape buffalo.

If I said how many hours have gone into this only a few would believe me. Its a custom floorplate I made for a BRNO in .375 that I did extensive metalwork on. Apart from the sky, all detail is in relief with a maximum depth of .022", in most places reducing to zero a couple of mm before the edge. All work is with hand tools to original artwork. The buff is an amalgum of the 20 or so pictures I gathered around me. Photography was a real challenge with the light upsetting the bulino effect in the relief.
Attached Images
File Type: jpg R0012163.JPG (87.7 KB, 196 views)
File Type: jpg R0012098.JPG (66.6 KB, 182 views)
File Type: jpg R0012155.jpg (98.7 KB, 201 views)
File Type: jpg R0012154.JPG (137.8 KB, 175 views)
File Type: jpg R0012178.JPG (65.7 KB, 151 views)
File Type: jpg R0012181.JPG (64.2 KB, 154 views)
File Type: jpg R0012176.JPG (63.2 KB, 155 views)
File Type: jpg R0012177.JPG (81.0 KB, 164 views)
File Type: jpg R0011948.JPG (84.7 KB, 155 views)
File Type: jpg R0011833.JPG (53.4 KB, 173 views)
File Type: jpg R0011564.JPG (104.2 KB, 169 views)
Reply With Quote
  #2  
Old 07-15-2010, 05:27 AM
KDavid's Avatar
KDavid KDavid is offline
Platinum
 
Join Date: Jun 2006
Location: Orlando, Florida
Posts: 561
Default Re: Bulino Relief Cape buffalo.

WOW!!!!! That is absolutly stunning Thanks for sharing
__________________
David Gruber
WWW.Sharpgraver.com
"The democracy will cease to exist when you take away from those who are willing to work and give to those who would not."
Thomas
Jefferson
Reply With Quote
  #3  
Old 07-15-2010, 08:03 AM
Fred Marrinan Fred Marrinan is offline
Platinum
 
Join Date: Jan 2008
Posts: 426
Default Re: Bulino Relief Cape buffalo.

Damien, Really Really outstanding work! How is it that you have stayed mostly under the radar so to speak. I know you are from the far side of the world but you are certainly not new to this? Great -Fred
Reply With Quote
  #4  
Old 07-15-2010, 12:51 PM
ArtisticAttributes ArtisticAttributes is offline
Gold
 
Join Date: Nov 2007
Posts: 127
Default Re: Bulino Relief Cape buffalo.

SUPERB!!! I really, really enjoyed seeing that.
Reply With Quote
  #5  
Old 07-15-2010, 03:35 PM
KatherinePlumer's Avatar
KatherinePlumer KatherinePlumer is offline
Platinum
 
Join Date: Jul 2007
Location: Oak Run, California
Posts: 233
Default Re: Bulino Relief Cape buffalo.

Oh my goodness, that is fantastic! REALLY nice job on that!!! Wowzers.

-Katherine
Reply With Quote
  #6  
Old 07-15-2010, 03:39 PM
Daniel Houwer's Avatar
Daniel Houwer Daniel Houwer is offline
Platinum
 
Join Date: Mar 2008
Location: Haarlem, Holland
Posts: 2,125
Send a message via Skype™ to Daniel Houwer
Default Re: Bulino Relief Cape buffalo.

|That is fantastic work!
About the time you spent on this, if you would say you spent a hundred hours on this I would not believe you. If it is way more than that I probably would
__________________
The best things in life are still made by hand.
Daniël's Photo Album
Reply With Quote
  #7  
Old 07-15-2010, 03:50 PM
Lucie Bandikova Lucie Bandikova is offline
Steel
 
Join Date: Jul 2006
Location: Czech Republic
Posts: 90
Default Re: Bulino Relief Cape buffalo.

That is beautiful work, it is very iteresting to look at last three pictures, thaks for pisting.
Lucie
Reply With Quote
  #8  
Old 07-15-2010, 09:01 PM
WVEngraver's Avatar
WVEngraver WVEngraver is offline
Platinum
 
Join Date: Apr 2008
Location: Tennessee
Posts: 1,656
Default Re: Bulino Relief Cape buffalo.

Damien, I was just checking these photos out in the gallery. This is the kind of work that MUST be seen. Absolutely perfect and the relief really takes this bulino piece to a fantastic level.

I'm guessing you have about 300 to 400 hours in this scene alone (not including the actual fabrication of the floorplate)?

Chris
Reply With Quote
  #9  
Old 07-16-2010, 01:29 AM
rbaptiste's Avatar
rbaptiste rbaptiste is offline
Platinum
 
Join Date: Nov 2007
Location: Modave (Belgium)
Posts: 1,133
Default Re: Bulino Relief Cape buffalo.

Wonderful.
Please, can you tell me how you arrive at this finish? Thanks
Attached Images
File Type: jpg R0011833.jpg (53.4 KB, 60 views)
__________________
http://rbaptiste.com
Reply With Quote
  #10  
Old 07-16-2010, 05:20 AM
Damien Connolly Damien Connolly is offline
Steel
 
Join Date: May 2010
Location: Andover, Vermont
Posts: 42
Default Re: Bulino Relief Cape buffalo.

Thank you all for your kind words. To say that I work in a vacuum here in Australia would be an understatement, and the contact I've had with my peers through the forum is of great importance to me. So thank you again.

You're right Joe, I've been at this since 1979. I'm self taught in my endeavours which encompass all fields of firearms manufacture and embellishment. When I see the tools and setups some forum members have, most would look askance at my workshop. You can see a cross section of my work athttp://www.craftsmanshipmuseum.com/Connolly.htm I've mainly done Australian work, but in the last couple of years have made the right contacts in the US, and with any luck will be emmigrating to join you in the spring of next year. The UNCIS wil not be hurried in these things though!

I'm actually a little embarrassed to say that you're on the right track Daniel and Chris. As usual, I've kept a careful log of hours (they're always a good read if I need to depress myself) and it comes to 266 hrs on relief work, and a neat 200 on bulino. Like I said Chris, I'm slow.

Roland... the shapes are chiseled, the flats areas filed where possible, then largely shaped with a variety of scrapers, the flats varying from .003" to .250" in width. These are "hook" type scrapers and in the main are pulled (in a constantly varying pattern to avoid chatter) but will cut in either direction. Rounds vary in radius from .002" to maybe .050" ( that's radius, not dia.) and are straight blade type. The secret weapon is a number of sub-miniature three sided machinists scrapers, the largest of which measures .055" across the widest part of the triangle, and the smallest .012". Each cutting face has a different camber to the cutting edge, which when used in a narrow angled crossing pattern, enable smooth undulating surfaces to be created. A finger rubbed in Rio Grande "Burr Life" and regularly wiped across the surface is a remarkable aid to clean cutting scrapers. All scrapers are lapped to polished sharpness under the microscope.
Burnishing the surface (I've also made tiny set of straight and bent burnishers from needle and escapement files) will show the high spots and "chisel produced" forms, which are then scraped away. (A straight burnished surface is seldom enough, as any irregularities are highlighted rather than removed.)
In this way a clean scraped finish is produced, at which point lapping with 700grit silicon carbide paste and purpose shaped mild steel laps that are constantly filed back to shape to maintain clean transition between forms. High spots are attended to with the scrapers and the surface lapped with 1200g paste, then the same two grits on shaped paddle pop sticks. In difficult areas I use an ebony stick, or even a Lexan one - its even harder. At this point you see all the bits that you should have scraped off before....and start again.
When the surface is true, (and I know this is your interest Roland), use both grits on 0000 steel wool, using the sticks to get it into the tight spots. Careful not to blurr the detail. The steel wool is pretty indiscriminate and can make a mess of painstakingly produced sharpness. Like any polishing operation, all marks from the previous medium must go before moving to a finer grit.

Thanks Damien.
Reply With Quote
  #11  
Old 07-16-2010, 06:32 AM
JJ Roberts's Avatar
JJ Roberts JJ Roberts is offline
Platinum
 
Join Date: Apr 2006
Location: Northern Virginia
Posts: 2,067
Default Re: Bulino Relief Cape buffalo.

Damien,You have a good eye for animal anatomy,scenery,clouds it's all there.That buffalo looks real mean and ready to charge,nice action pose.Keep up the good work and keep posting,like to see more.Where in the US are you planing to live? Pick a state that's gun friendly. J.J.
Reply With Quote
  #12  
Old 07-16-2010, 07:48 AM
rbaptiste's Avatar
rbaptiste rbaptiste is offline
Platinum
 
Join Date: Nov 2007
Location: Modave (Belgium)
Posts: 1,133
Default Re: Bulino Relief Cape buffalo.

Thanks Damien for your answer. I am very interesting by your tools. can you post any pictures of the scratching and polish tools? Maybe a little tutorial next time if it is possible.
Thanks a lot
__________________
http://rbaptiste.com
Reply With Quote
  #13  
Old 07-16-2010, 07:46 PM
WVEngraver's Avatar
WVEngraver WVEngraver is offline
Platinum
 
Join Date: Apr 2008
Location: Tennessee
Posts: 1,656
Default Re: Bulino Relief Cape buffalo.

I knew I was in the ballpark Damien. Quality work requires LOTS of time. It might leave your wallet a little lighter but it always fills up your soul.

I'd sure appreciate a photo of the tools used in the relief work as well.

Thanks again. JJ mentioned you are coming to the States. Very cool. He's right ... some states are bad news for anything more deadly than a beach ball. Then again, the most gun friendly states only serve biscuits and gravy in their restaurants. (don't ask me how I know that but I would kill for fresh shrimp and lobster on the barbie right now ... ).
Reply With Quote
  #14  
Old 07-17-2010, 03:48 AM
Damien Connolly Damien Connolly is offline
Steel
 
Join Date: May 2010
Location: Andover, Vermont
Posts: 42
Default Re: Bulino Relief Cape buffalo.

Thanks for your interest guys... and I'll certainly post a few pics of the tools, but it will have to wait a few days. Very busy catching up ( I've got my wallet weighted down with a rock) and photography gets time consuming. So its most visible when I do, I'll make a new post of it on the engravers forum. I've just started to realise that's where a lot of the traffic is.

Initially I'll be probably settling Vermont, my contacts there say the law is not too bad.... and I have seen a few biscuits and gravy on my visits, but it seems there's a choice.

Damien.
Reply With Quote
  #15  
Old 07-17-2010, 07:07 PM
Peter_M's Avatar
Peter_M Peter_M is offline
Platinum
 
Join Date: Jun 2009
Location: BC, Canada
Posts: 260
Default Re: Bulino Relief Cape buffalo.

This is a WOW piece, thank you for posting.

Peter
Reply With Quote
  #16  
Old 07-18-2010, 07:20 AM
Gert's Avatar
Gert Gert is offline
Platinum
 
Join Date: Sep 2008
Location: Tienen (Belgium)
Posts: 571
Default Re: Bulino Relief Cape buffalo.

Great work man! keep posting!
__________________
Gert Mathys

My page on Facebook
Reply With Quote
  #17  
Old 08-20-2010, 02:48 PM
George Spring's Avatar
George Spring George Spring is offline
Steel
 
Join Date: Mar 2010
Location: Connecticut
Posts: 37
Default Re: Bulino Relief Cape buffalo.

Nice piece of work!.........
__________________
"You make your artwork less interesting at your own peril"
Reply With Quote
  #18  
Old 08-21-2010, 11:50 AM
Tom McArdle's Avatar
Tom McArdle Tom McArdle is offline
Platinum
 
Join Date: Apr 2006
Location: Western NY USA
Posts: 1,040
Default Re: Bulino Relief Cape buffalo.

That is one of the most beautiful engravings I have ever seen.

A tremendous achievement!

Thanks for showing that!

Vermont is beautiful, and gun friendly in a unique way.

Take care,

Tom
__________________
Tom McArdle
Reply With Quote
  #19  
Old 08-22-2010, 11:37 AM
kcrutcher kcrutcher is offline
Platinum
 
Join Date: Dec 2007
Posts: 397
Default Re: Bulino Relief Cape buffalo.

Damien

What else is there to say.

Just Beautiful.

I first thought it was just Bulino, but Sculptured and Bulino is Fantastic.

Ken Crutcher
Reply With Quote
  #20  
Old 08-22-2010, 04:20 PM
generalwar generalwar is offline
Steel
 
Join Date: Aug 2010
Location: USA
Posts: 11
Default Re: Bulino Relief Cape buffalo.

That is really superb work.
Reply With Quote
  #21  
Old 08-22-2010, 10:41 PM
tundratrekers@mtaonline.n tundratrekers@mtaonline.n is offline
Platinum
 
Join Date: Feb 2007
Location: alaska
Posts: 698
Default Re: Bulino Relief Cape buffalo.

Thats awesome! Quite a time investment.Is it really possible to be paid for all that work? Or is it for yourself? Awesome work and dedication.mike
Reply With Quote
  #22  
Old 08-23-2010, 03:58 AM
SEngraver SEngraver is offline
Platinum
 
Join Date: Sep 2008
Location: UK.
Posts: 3,484
Default Re: Bulino Relief Cape buffalo.

HI Damien,
This amongst is one of the most magnificent engraving,bulino,sculpting work I have ever seen.As Chris mentioned another level.
And the different tools and accessories you made as you progressed is amazing......
SE
__________________
Learn from those who know more than you do and teach those who know less than you do. - I.M.
Reply With Quote
  #23  
Old 08-25-2010, 03:25 PM
Matson Matson is offline
Steel
 
Join Date: Jan 2009
Location: Maurice, LA
Posts: 53
Default Re: Bulino Relief Cape buffalo.

In the modern vernacular.....OMG, I can't imagine the hours that went into the piece. Thanks for sharing with us.
Reply With Quote
  #24  
Old 08-27-2010, 05:06 AM
Damien Connolly Damien Connolly is offline
Steel
 
Join Date: May 2010
Location: Andover, Vermont
Posts: 42
Default Re: Bulino Relief Cape buffalo.

Quote:
Originally Posted by tundratrekers@mtaonline.n View Post
Thats awesome! Quite a time investment.Is it really possible to be paid for all that work? Or is it for yourself? Awesome work and dedication.mike
Given that the client is well kown here in Australia I shouldn't talk dollars, but yes, I did feed myself on the proceeds, though it's fair to say that I wasn't eating caviar. But then to have the job I want most in the world , and then want to be rich as well? I dunno. But I get slower and pickier the older I get, and shall we say, "suitable clients" have become very important!

Thanks for the comments guys....Damien
Reply With Quote
  #25  
Old 08-27-2010, 08:28 AM
Gail Gail is offline
Platinum
 
Join Date: Dec 2006
Location: Ocala, Fl
Posts: 414
Default Re: Bulino Relief Cape buffalo.

Damien, I think you nailed it, there is more than one kind of rich! I also doubt that doing the job you most want in the world, as well as you do it, will ever keep you from eating even caviar now and then!
Thank you for sharing your work.

Gail
__________________
festina lente
make haste slowly
A. Caesar
Reply With Quote
  #26  
Old 08-29-2010, 07:23 AM
gluckie gluckie is offline
Steel
 
Join Date: Aug 2006
Location: México, D.F.
Posts: 82
Default Re: Bulino Relief Cape buffalo.

Is your manual work that has to take time, skill and love of art. There are now engraving techniques that still survive in spite of technological advances. Thank you.
Reply With Quote
  #27  
Old 08-04-2011, 08:58 AM
Jim Kelso's Avatar
Jim Kelso Jim Kelso is offline
Gold
 
Join Date: Apr 2006
Location: Vermont
Posts: 126
Default Re: Bulino Relief Cape buffalo.

Damien somehow I missed this. Only a year late! It's an extraordinary piece of work showing the full range of your mastery from sculpting to bulino along with the superb design. Bravo!

Jim
__________________
http://www.jimkelso.com
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Conduct
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -6. The time now is 03:49 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.