Thread: NSK rotary tool
View Single Post
Old 12-23-2020, 11:12 PM
Mike576 Mike576 is offline
Join Date: Nov 2020
Location: United States
Posts: 26
Default Re: NSK rotary tool

You should be able to. I have the foot control classic and run steve lindsays bench jewel rotary tool off the auxiliary port. The nsk presto is set up in the same way as steves tool off the regulator. I have the nsk and the bench jewel and both use seemingly the exact same pedal. The only issue i can see would be that the presto says specifically to use 35 psi. Whereas when i asked steve about what psi to run the bench jewel he said he uses it at whatever the classic is set to. So the psi can be varied. Because of this i run the presto off its own regulator and keep it at 35 psi as recommended by the manufacturer.
Reply With Quote