Quote:
|
Originally Posted by Steve Lindsay
Thanks Phil, Did you work with the resistance screw on the back of the handle and the stroke adjustment ring some? Do you like resistance set at the 6:00 position?
Steve
|
I have the 6.00 position and it's ok. At the moment i'm using up to 70 psi. Tungsten piston with a longish stroke and a .5mm flat chisel for deep background removal between the scroll on the second carved gun, then i'll be swapping over to a 1.5 mm flat tool for initial carving. Because of the smoothness of the cut it is possible to get within about 90% of the finished work.
I'ts going great!
Phil